News Archiv
News
Hits: 1119
News Archiv
News 2021
Product catalogue 2021 / price adjustment as of December 18, 2021
Unfortunately, it is no longer possible for us to continue to absorb the sharply increased costs in all areas without adjusting our sales prices. We must therefore levy a material price surcharge (MPS) on all products from December 18, 2021.
MPS on all products 7%
MPS on all steel laser parts 65% (does not apply to stainless steel laser parts)
So far there has only been an MPS between 5% and 65% on articles in the steel sector. Steel laser parts made from sheet metal are particularly hard hit, and the price has exploded in some cases. All other articles did not have an MPS yet.
Since it is currently not foreseeable when this situation will ease significantly again we have to raise these material price surcharges. On our website you will always find information about the current applicable surcharges for our products.
We will check these prices regularly – completely transparent for you - and hope that we can do without it again as soon as possible. In the webshop, however, you will always find the currently valid price including the current MPS.
Product catalogue 2021 / catalogue price information
We have completely revised our entire catalogue for you. Our goal was to present the entire program more clearly than before. To show larger product pictures and to answer questions from our customers, which we get asked again and again, as close as possible to the products.
Furthermore, of course, all products from the expansions of the last 2 years have been included. In addition, many new items that we have taken to our warehouse However, existing items have also been improved, e.g. the handrail support rings with internal fastening screws or the significantly more stable support profiles for the tubular frame locks.
News 2020
Catalogue extension 2020
In addition to our main catalogue from June 1st, 2019 and the 1st expansion from October 1st, 2019 we would now like to draw your attention to our new catalogue extension for 2020.
The following products and some other new items have arrived and can be delivered immediately from our stock.
Please note that you can download this catalogue extension 1/2020 in the download area of our website and from there print it if required.
You will also find all new items on the News page in our web shop and of course in the corresponding categories. If you have any questions about this or other products, please feel free to contact us.
Corona crisis 2020
The corona crisis is currently keeping Germany and the world in suspense and the effects of this special situation has been felt throughout all manufacturing sectors since it arrived around mid-March.
We are currently receiving frequent questions about our basic ability to deliver. We would therefore like to take this opportunity and send you an note about the current situation and how we are dealing with it within our company.
As a wholesaler, we have so far been spared direct restrictions, but of course you can feel the effects indirectly. Delivery of goods from Germany, Europe and of course, especially from the Far East are sometimes considerably delayed.
Our warehouse is full and we are still delivering!
Please always be aware that the duration of all shipments is determined by the delayed parcel traffic. Parcel service providers can no longer guarantee that all shipments will be delivered without delay. We are currently doing everything we can to ensure we can deliver to you. With this we hope to support our customers and enable you to continue to receive components. That helps you and that helps the economy.
We want you to be able to continue producing your work. To do this and to ensure we offer our employees the safest environment by keeping contact to an absolute minimum we have restricted access to the office building. We therefore ask all customers who want to pick up something to register only at gate 3 / goods issue.
If there is already another customer in this relatively small pick-up area, we ask you wait until the area is free again and only then enter this area. We are currently paying attention to social distancing so ensure you keep a safety distance of at least 2m to prevent the spread of infections.
This situation is new to all of us, but we are sure that together we will be able to work through this crisis until it has come to pass.
We wish you personally, your family and all employees of your house All the best.
The entire team from Beurskens and the management
Company name changed to GmbH 2020
With the start of the 2020 financial year, the sole proprietorship Beurskens e.K. Becomes the company Beurskens GmbH. With this step a share of the management was handed over from father Gerardus Beurskens to son Mike Beurskens.
The management of the company Beurskens GmbH railing accessories and glass fittings is therefore now equally represented by the managing directors Gerardus Beurskens and Mike Beurskens.
News 2019
Catalogue addendum 2019
As an addendum to the current catalogue, we have sent a catalogue supplement with 8 pages to our customers which is valid as of October 1st. In it we present a hinge connector for corners on handrails or other constructions that are significantly smaller than 90 degrees.
Furthermore, a very small point holder system with only 22 mm diameter and our new stainless steel double hook wrench for mounting all our point holders. In addition, spacers with radius as a universal component for many different applications and our drainage plugs. Furthermore, a very small point holder system with only 22 mm diameter and our new stainless steel double hook wrench for mounting all our point holders. In addition, spacers with radius as a universal component for many different applications and our drainage plugs.
All components are as per usual available for immediate delivery from stock. From this link you can download the current catalogue as a PDF file: >> PDF downloaden <<
Catalogue 2019/2020
The new railing accessories and glass fittings catalogue has been sent to our customers and is valid from 1 June 2019. With the appearance of this catalogue all previously published catalogues lose their validity.
This year we have again included many new products in our program to round off the product range. These include a frequently requested handrail support with hinge on the bracket, new circular round blanks, square end plugs with firmly attached pin and various accessories for door construction.
In the field of canopies, we have developed a new stainless steel sword canopy and also dealt with the problem of attaching such components to buildings with ETIC systems. With the reducers for threaded rods, we have found a cost effective and viable solution to these known problems.
Interesting will be the initially inconspicuous products such as the new Justierplatten with which railing and constructions can be easily aligned or the already known wall and floor panels with pipe socket, for insertion and bonding, which we now also offer with 2 instead of 3 mounting holes.
An excerpt of the new items with a page reference can be found in the front of the catalogue with the table of contents. Please exchange your old catalogue for the new one and get an overview of the current program. If you do not have the new catalogue or if you need more copies, please let us know.
From now on NO minimum order value any more
With the appearance of the new catalogue, we have abolished the previous minimum order value of 30 euros net. For orders and collections less than 30 euros net value of goods, however, we have to charge a minimum quantity surcharge of 5 euros net, as such orders can not be processed to cover costs.
We hope for an understanding of this change and give our customers the opportunity to decide for themselves if you want to order something to reach the 30 Euro net value or if you accept this small surcharge.
We hope for an understanding of this change and give our customers the opportunity to decide for themselves if you want to order something to reach the 30 Euro net value or if you accept this small surcharge.
News 2018
Catalogue 2018 / 2019
The new railing accessories and glass fittings catalogue has been sent to our customers and is valid from 1 May 2018. With the appearance of this catalogue, all previously published catalogues lose their validity.
For the new catalogue we have also come up with some new products. Our goal was not to include hundreds of new products, but to offer selected goods that really help you in your daily work.
We hope you enjoy our new wall anchors, which are a further development of the already familiar parts. These products come with no visible screws for clamping the railing post and are characterized by a particularly attractive appearance.
In the field of locks, we would like to draw your attention to the tubular frame locks with panic function and the pre-machined round tube for tubular frame locks. These components can be used both with and without E-opener and open up new possibilities to fulfill the wishes of your customers.
For the first time, a booklet with markers has been added to the catalogue, with which you can quickly find your own personal favorites. Take the time to look through our new catalogue and discover our new components.
An excerpt of the new products with a page reference can be found in the catalogue in the table of contents. Please exchange your old catalogue for the new one and get an overview of the current program. If you do not have the new catalogue or if you need more copies, we ask for some more information.
Re-certification 2018
Since April 2015, Beurskens has been certified by TÜV Rheinland in accordance with ISO 9001 and DIN EN 1090. This makes it easier for our customers to comply with the requirements of European standards.
The existing ISO 9001: 2008 certification was updated to the new ISO 9001: 2015 standard in February 2018. At the same time, the surveillance audit for DIN EN 1090 was successfully completed.
With these certificates and the delivery note, our customers can prove the purchase of material from a certified supplier. In the Download area the certificates for your documents are available.
News 2017
Catalogue 2016 / 2017
The new balustrade accessories and glass fittings catalog has been sent to our customers and will be valid from 6 June 2017 onwards. With the appearance of this catalog all previously published catalogues lose their validity.
We hope you like our new split rosettes, the extra long 90 degree connection plates, the wall and floor anchors, the circular cups, the end caps with the fixed support, the angular point holders and various other new components.
We would like to mention our completely newly developed counterparts at this point. These allow the use of our E-Opener without it causing height offset problems.
Between the lock and the counterbox. These products can be used with or without E-opener, right and left, and are available in steel and stainless steel.
Furthermore, the long steel and stainless steel door racks, the new components for canopies, the adjustable wall brackets and the angular point brace. Discover all these and many more novelties in the catalog as well as in our online shop, where these products have already been introduced.
All products are immediately available from stock as per usual. In addition to new items, old components have also been improved. For example with thesaddle connections we have added a recess to accommodate a rivet nut. Small details that make these products even more practical.
An excerpt of the new items with a page reference, can be found in the catalog in the table of contents. Please replace your old catalog with the new one and get an overview of what we currently have on offer. If you do not have the new catalog, or if you would like more copies, please let us know.
ABZ Info
The general building supervisory approval Z-70.5-183, issued in October 2012, was extended in March of this year by 5 years. We have already worked intensively with the technical possibilities in advance and have incorporated several innovations.
On the one hand we have integrated a fourth installation situation for the holders. Mounting of the glass holders can now also partly take place on the upper and lower chord between the posts. A variant which has been much desired by our customers in the past.
The new glass holder model 50L and model 50R are now approved by the building authorities. Further extensions concern the material 1.4462, a new connection radius for 48.3 mm pipes and variable dimensions when mounting the brackets to the uprights or upper and lower straps.
The tables in the back of the approval are not applicable. With the aid of these tables and the value for the wind loads to be considered at the site of operation, the dimensions for the maximum disk widths, with the use of the holders in the outside area, could be determined relatively simply.
This however would lead to over-regulation by the authorities, as these values could also be calculated. Therefore, this information is no longer included and the static values of the clamping holders are indicated in the approval.
With the aid of a staticator, the maximum disk sizes could be determined with these characteristic values. This approach seems to us to be somewhat too uncomfortable. For this reason, as of now, we are offering our customers a sample statism with corresponding tables in addition to the ABZ.
News 2016
Catalogue 2016 / 2017
The new catalogue for railing accessories and glass fittings will be sent to our customer base and will be valid from the 9th of May . With the appearance of this catalogue all previously published catalogues become invalid.
Over 220 pages we have put together an extensive selection with more than 130 new items. We have kept the catalogue layout the same so our customers can find the products they are looking for without problems.
Completely new in the selection are products from the Fischer company with European technical approval. In recent years, many of our anchor plates and discs have been changed to use modern fastening technology and we can now offer these products directly.
In the table of contents we highlight these innovative additions with a thumbnail image and page reference. All new products are of course available for immediate shipment and can be recommended by us without restriction .
Please replace your old catalogue with the new one and get an overview of the current selection . If you have not yet received the new catalogue, or if you need additional copies, please send us a message.
News 2015
Catalog extension 2015 / 2016
We have again expanded the range of products in our assortment since the last catalogue was brought out. Even before we release the newest catalogue we want to make these products available to you and have released an extension to our current catalogue.
We want to bring your attention especially to the new end caps for construction pipes with a wall thickness of up to 4.0 mm. The accuracy of products with end caps that are glued is only possible trough deviations in standard construction pipes.
One of our models of die-cast aluminium door handles has been removed from our range. We have replaced this with, in our opinion, a more luxurious model with stainless steel screw. We have also added two new knobs with square holes.
In addition to that we have some new ball and rods holders which will further complete our program. All new products are immediately available from stock and from the online shop. If you have any questions about the products don't hesitate to contact us!
Catalogue 2015 / 2016
The new catalogue for railing accesories and glass fittings will be send to our customerbase and will be valid from June 2015. With the appearance of this catalogue all previously distributed catalogues will be void.
More than 200 pages and more than 180 new products are waiting for you. Our own Universal canopyset was supplemented by a smaller product with 12 mm rods. In the glass holders range the model 40 has been extended to the 48-pipe connection and the Model 20 to the clamping force of 8.76 mm glass.
The steelparts- and locking assortment was extended with many new products and we significantly expanded the range of accessories with high quality abrasives. In the steel and stainless steel range we have new anchor plates in 8 and 10 mm.
For an excerpt of the accesories with a page reference, please see the table of contents in the catalogue. All new products are of course available for immediate shipment and can be recommended by us without restriction.
Please replace your old catalog with the new one and get an overview of the current offerings. If you have not yet recieved the new catalogue or if you need additional copies please contact us and we will mail them to you as soon as possible.
Certification 2015
In April 2015, the company Beurskens by TÜV Rheinland became ISO 9001 and DIN EN 1090 certified. This makes it easier to meet the requirements of new European standards for our customers.
Existing incoming goods inspection and quality assurance systems have been audited by external staff and have been further optimized. All processes were covered, where neccesary completely revised and additionally fully documented.
With these certificates, you our customer, can prove you have purchased from a certified supplier. In the Download area you can find the certificates for your documents.
Onlineshop 2015
The online portal for our customerbase is open. Access to our online shop is exclusively available to our customers. We protect our customer base and we protect our jobs.
Here customers have the option to have a closer look at all our products than in our catalogue. Nearly all of our products have pictures and drawings and provide a better overview
In addition to the extra images it is also possible to make factual and technical information about our products available, making details and connections better understood.
Ask today for your login details and take advantage of our webshop.
News 2014
Catalogue 2014 / 2015
The new railing accessories and glass fittings catalogue has been sent to our customers and becomes effective after 16 May 2014. The publication of this catalogue renders all previously published catalogues ineffective.
All parts from the past supplements and many new products are available for immediate delivery. More than 200 pages and more than 100 new articles are waiting for you. In addition to the new products, some old parts have been considerably improved.
Our newly developed plate supports can deal with thicknesses of 1.5 to 4 mm and are fastened with M8 screws. The stainless steel knobs for lock housings habe been completely revised and supplemented by a square version.
Please, exchange your old catalogue against the new one and get an overview of our current programme. Please, contact us if you did not get the new catalogue or need more copies.
Duplex steel glass clamps
Our officially approved glass clamps can be also used now at swimming-pools, busy streets and by the sea because we are now providing them as well made of duplex steel.
This stainless steel, material number 1.4462, distinguishes itself by its very high stability. It is much sturdier than V4A and achieves the highest corrosion resistance class.
The two models 40 and 55 are useful in almost any common situation, for a very fair price. These included, we have an ideal portfolio for our customers in those areas, too.
Handrail support with clip rosette
In the handrail supports area our product range was extended by 3 new models with clip rosettes. This product's cover rosette is easily attached and can be any time removed.
The baseplate is a 70 x 4 mm disc with two 8.5 x 10 mm oblong holes. The bracket is solidly screwed on this disc and secured with glue against the parts twisting or coming apart. A fitting rosette is included in delivery.
If you need any other variations of this handrail support for your customers, we can supply the clip disc used here also as a single part. Add up to 5 different brackets or 12 different connection discs.
News 2013
Catalog extension 2013 / 2014
As we continue to develop new accessories for our customers and pass them on to our warehouse we repeatedly bring up components which are immediately available from stock after publication of the catalog.
We currently have over 30 new parts prepared for you again. The informations about these goods were shipped to all our customers with the catalog extension 2013/2014 on October 01, 2013.
It is wall anchor of steel for welding, end caps for example for 40 x 60 x 2 mm stainless steel square tube, long sleeves for wall anchors, mounting plates and several welding lugs.
Please put this catalog extension to your main catalog. Should this not be available anymore please request a new one here. We always attach the new extension to our catalog sendings.
Lasing instead of punching
We believe that laser-cut round and anchor plates are faster and easier to use, that's why we now produce almost all punchings by this manufacturing technology.
We have already laser-cut many of these product groups in the past. Due to the positive feedback we have decided to pursue this course to the end.
We hope that you will appreciate these advantages in processing and that you will like the quality of laser-cut products. Only in the small stainless steel plates Ø 33 and 42 with 12 mm bore we deviate against it for cost reasons.
Laser-cut products with clean cut edges instead of punched products with sharp edges. No distortion of the material from occurring punching forces any more.
Stainless steel round plates and anchor plates of 10 mm thick material
Metal sheet thicker than 8 mm could not be used in stainless steel punching so far or was simply too uneconomical. The expenses for tools and wear could not be predicted.
Since we have begun to laser-cut these products, though, we can also provide stainless steel round and anchor plates as thick as 10 mm.
These prefabricated parts meet highest demands for stability. Some holes were made wide enough to permit push-through installation or adhesive systems.
Top News | NEW

Steel gate hinge with pivot bolt M10 | M12


